Toyota Venza Oil Maintenance Light Reset Procedure After Oil Change

0
3052
venza oil maintenance light reset

Toyota Venza Oil Maintenance Light Reset Procedure After Oil Change:

2009-2015

  1. With vehicle ignition switched to ON position, make sure odometer is showing “Tripmeter A”, then turn the ignition switch to OFF position
  2. Push and hold the TRIP reset or MODE button
  3. While holding reset button, switch ignition to ON position
    **w/ ENGINE START/STOP button, keep your foot off brake pedal and push ENGINE START/STOP button twice to get Key On/ Engine Off mode
  4. Continue to hold the reset button until the odometer displays “000000” and then the original value is displayed
  5. Turn the vehicle off and back on to confirm reset was accepted

OR

  1. On the navigation screen, press SETUP
  2. Then press VEHICLE, then MAINTENANCE
  3. Touch the desired item in which you need to reset (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.)
  4. From here, fill in the requested fields with the new “Next Service” interval (i.e. date and distance till next service is due)
  5. Press OK when complete
  6. Repeat steps 3-5 for any other services that were performed

 
We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, asian, and european manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

simple-1   simple-1