How to Reset Mercedes Sprinter Service Indicator After Oil Change

Reset Mercedes Sprinter Service Indicator:

2014-2015

1. Switch ignition ON position without starting engine
2. Allow all the warnings and messages to clear and the mileage displays before next step
3. Press and hold the “0” button on the instrument cluster for 30 seconds or until you hear a beep
4. Press and hold the “0” button again for 3 seconds then release and press it again
5. Turn the vehicle to the OFF position and the back ON to confirm the reset is completed

OR

1. Switch ignition ON position without starting engine
2. Allow all the warnings and messages to clear and the mileage displays before next step
3. Press the UP/DOWN arrows until “service scope x in xxx km” appears in the display
4. Press and hold the “0” button on the instrument cluster for 30 seconds or until you hear a beep
5. Press the lower PAGE button once
6. Press the UP/DOWN arrows until you find “Service in xxx km”
7. Press the “0” button on the instrument cluster until “Carry out” appears in the display
8. Press the UP/DOWN arrows until the menu selection “Oil types” appears in the display
9. Use the “+” and “-“ buttons to select the oil desired oil specification and use the UP arrow to select
10. Press and hold the “0” button for 3 seconds or until the display shows “Service confirmed”
11. Press the UP button to display the new service scope in the instrument cluster display
12. Turn the vehicle to the OFF position and the back ON to confirm the reset is completed

2010-2013

1. Close all doors, hood, and trunk lid and turn the ignition to position II (ON)
2. Press the main menu PAGE buttons repeatedly to display the main trip/temp menu
3. Press the UP and/or DOWN arrows to scroll through the sub-menus to display the FSS (Flexible Service System) menu
4. To enter reset mode, press and hold the TRIP or DIMMER button (located on the left side of the instrument cluster) until the message “Do You Want To Reset Service Interval?” “Confirm reset Using Reset Button” or “Service Interval To Reset: Press Reset Button for 3 Sec.” is shown in the display, then release the button
5. Press and hold the TRIP or DIMMER button again until “Service Interval Has Been Reset” is shown in the display and then release the button
6. The display will show the FSS sub-menu with a new mileage interval, then turn the ignition to position 0 (OFF)

 
Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!