Mercury Mountaineer Oil Change Required Light Reset Procedure

0
4761
Mercury Mountaineer Oil Change Required Light Reset

Mercury Mountaineer Oil Change Required Light Reset Procedure:

2008-2010

  1. Press RESET button to display “Hold Reset If New Oil”
  2. Press and hold RESET button for more than 2 seconds
  3. Oil life is set to 100% and “Oil Change Set To 100%” is displayed

2006-2007/strong>

  1. Press and release the SETUP button until “System Check” is displayed
  2. Press and release the SETUP button again to display “Oil Life = XXX% Hold Reset = New”
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%

2002-2005

  1. Press the SETUP button repeatedly until “Press Reset At Oil Change” message is displayed
  2. Press and release the RESET button to display “Hold Reset To Confirm”
  3. Press and hold the RESET button to see “Oil Life Set To 100%”

1999-2001

  1. Turn the vehicle to the ON position
  2. Press and hold the OIL CHANGE RESET button for 5 seconds or until the display shows “Oil Life Reset To 100%”
  3. Turn the ignition to OFF position and turn back on to verify reset successful

 
Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

simple-1   simple-1