How to Reset Change Oil Light on Monte Carlo After Service

Reset Change Oil Light on Monte Carlo

Reset Change Oil Light on Monte Carlo:


  1. Display the “Oil Life Remaining” message in the Driver Information Center
  2. Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET)
  3. The oil life will change to “100%”


  1. Turn the ignition to the ON position with the radio off
  2. Press and hold the DISP button on the radio for at least 5 seconds until “Settings” is displayed
  3. Scroll through the menus by pressing the SEEK up or down arrow until “Oil Life” appears in the display
  4. Press the PREV or NEXT button to enter the submenu
  5. Press the DISP button to reset
  6. A chime will be heard to verify the new setting and “Done” will be displayed for 1 second
  7. Once the message has been reset, scroll until EXIT appears on the display, then press DISP button to exit


  1. Turn ignition switch to ON position with engine off
  2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key
  3. Change Oil lamp will flash for 2-10 seconds while it resets
  4. Once it stops flashing, the maintenance light reset is complete
  5. Turn key to OFF position and then start engine to verify indicator is no longer illuminated

Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

simple-1   simple-1