Ford Escape Oil Change Light Reset After Maintenance Service

Ford Escape Oil Change Light Reset Procedures:

2013-2015

1. Turn the ignition to the ON position without starting the engine
   *For vehicles with push-button start, press and hold the START button for 2 seconds without pressing the brake pedal to put in ON mode
2. Simultaneously press the accelerator and brake pedals and hold them in the fully pressed position
3. After 3 seconds, the message center displays “Service: Oil Reset In Prog”
4. Continue to hold both the accelerator and brake pedals for 25 seconds or until the display shows “Service: Oil Reset Complete”
5. Release both pedals and place ignition in the OFF position/mode

2008-2015

1. Press and release the SETUP button to display “Oil Life XXX% Hold Reset = New”
2. Press and hold the RESET button for 2 seconds and release to reset oil life to 100%

2010-2012

1. Use the UP and DOWN arrow buttons to scroll to the Settings menu and press the RIGHT arrow to enter the submenu
2. Scroll to the Vehicle menu and press the RIGHT arrow
3. Scroll to the Oil Life Reset menu and press the OK button

2005-2007

1. Press the SET button to access the “Sys Chck” menu
2. Press and release SET button to get to “Oil Chng XXX% hold Set New” menu
3. Press and hold SET button for 2 seconds or until “Oil Change Set To 100%” is shown in display
4. Release the button and the oil life is now reset

 
Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!