Chevy Silverado Truck Change Engine Oil Soon Light Reset Procedure After Service

0
7601
Chevy Silverado Truck Change Engine Oil Soon Light Reset

Chevy Silverado Truck Change Engine Oil Soon Light Reset Steps:

2011-2015

  1. Display the “Oil Life Remaining” message in the Driver Information Center
  2. Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET)
  3. The oil life will change to “100%”

2007-2010

  1. Turn ignition switch to ON position with engine off
  2. Press the MODE button until the DIC reads “Oil Life Left/Hold Set To Reset”
  3. Press and hold the SET button until the display reads “100 percent”
  4. You will hear 3 chimes and the “Change Engine Oil Soon” message will go off
  5. Turn the key to the OFF position and back on to confirm reset successful

1999-2015

  1. Turn ignition switch to ON position with engine off
  2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key
  3. Change Oil lamp will flash for 2-10 seconds while it resets
  4. Once it stops flashing, the maintenance light reset is complete
  5. Turn key to OFF position and then start engine to verify indicator is no longer illuminated

 
Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

simple-1   simple-1

NO COMMENTS

LEAVE A REPLY