How To Reset Nissan Armada Oil Change Reminder Light

0
864
reset Nissan Armada oil change reminder light

How To Reset Nissan Armada Oil Change Reminder Light:

2015

  1. Turn ignition switch to ON position
  2. Cycle through the different modes by turning the INFO knob (located on the instrument cluster) to highlight the Setting menu
  3. Enter the Setting mode by pressing the INFO knob
  4. Turn the INFO knob to highlight the Maintenance option then select the option by pressing the INFO knob
  5. Highlight desired field (Engine Oil for oil change) by turning the INFO knob and then pressing the INFO knob to enter the field
  6. Highlight the Reset option by turning the INFO knob and then press the INFO knob to select
  7. Select the mileage by turning the INFO knob and then press the INFO knob to reset
  8. Make sure that the mileage displayed reads 0
  9. Repeat steps 4-7 for Oil Filter field and Tire field if tires were rotated

2013-2014

  1. Turn ignition switch to ON position
  2. Use the INFO button to find the Maintenance option and press ENTER to select the option (some displays will have a MAINTENANCE button instead of an INFO button in which case you will only need to push the MAINTENANCE button to proceed to the next step)
  3. Use the UP/DOWN arrows (or turn center knob) to highlight the Engine Oil option and press ENTER to select the option
  4. Use the UP/DOWN arrows (or turn center knob) again to highlight the Reset Distance option and press ENTER to select the option
  5. The mileage should change to 0
  6. Press the BACK button on the control panel to go back to the previous screen
  7. Repeat steps 3-6 for Oil Filter and Tire (if the tires were rotated during service)

2007-2012

    The Vehicle Information Display uses two buttons, an ENTER button (looks like two overlapping boxes) and a NEXT button (a single circle/dot).

  1. Turn ignition switch to ON position
  2. Cycle through the different modes by pressing the ENTER button repeatedly until the “>Setting” mode is displayed
  3. Enter the “>Setting” mode by pressing the NEXT button
  4. Press the NEXT button until the “>Maintenance” option is highlighted, then select the option with the ENTER button
  5. Highlight desired field (>Engine Oil, >Oil Filter, >Tire) by pressing the NEXT button and then press the ENTER button to enter field
  6. Highlight the “>Reset” option by pressing the NEXT button twice and then press ENTER
  7. Lastly, select the mileage by pressing the NEXT button once and then press ENTER to reset
  8. Make sure that the mileage displayed reads “0”
  9. Repeat steps 4-7 for >Oil Filter field (and >Tire field if tires were rotated)

2005-2006 (w/ Navigation):

  1. Turn ignition switch to ON position
  2. Press the TRIP button located under display to display Options menu
  3. Use center joystick to scroll down to Maintenance menu then press ENTER on the joystick to select
  4. Highlight Engine Oil using the joystick and then press ENTER to select
  5. Highlight Reset using the joystick and then press ENTER to reset
  6. Make sure that the mileage displayed reads 0
  7. Repeat steps 3-5 for Tire Rotation if the tires were rotated

 
Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

simple-1   simple-1