Nissan Murano Oil Light Reset Procedure After An Oil Change

0
7761
Nissan Murano Oil Light Reset

Nissan Murano Oil Light Reset Procedures for All Years:

2015

  1. Turn ignition switch to ON position
  2. Press the LEFT/RIGHT arrow buttons located on the left side of the steering wheel to select the SETTINGS menu and confirm with the OK button
  3. Use the UP/DOWN arrows to scroll the SETTINGS menu and select MAINTENANCE and confirm with the OK button
  4. Select OIL & FILTER to set or reset the distance for the next oil change reminder
  5. Repeat steps 5-7 to reset TIRE if the tires were rotated during service

2011-2014

    The Vehicle Information Display uses two buttons, an ENTER button (looks like two overlapping boxes) and a NEXT button (a single circle/dot).

  1. Turn ignition switch to ON position
  2. Cycle through the different modes by pressing the ENTER button repeatedly until the “>Setting” mode is displayed
  3. Enter the “>Setting” mode by pressing the NEXT button
  4. Press the NEXT button until the “>Maintenance” option is highlighted, then select the option with the ENTER button
  5. Highlight desired field (>Engine Oil, >Oil Filter, >Tire) by pressing the NEXT button and then press the ENTER button to enter field
  6. Highlight the “>Reset” option by pressing the NEXT button twice and then press ENTER
  7. Lastly, select the mileage by pressing the NEXT button once and then press ENTER to reset
  8. Make sure that the mileage displayed reads “0”
  9. Repeat steps 4-7 for >Oil Filter field (and >Tire field if tires were rotated)

2009-2010

  1. Turn ignition switch to ON position
  2. Use the INFO button to find the Maintenance option and press ENTER to select the option (some displays will have a MAINTENANCE button instead of an INFO button in which case you will only need to push the MAINTENANCE button to proceed to the next step)
  3. Use the UP/DOWN arrows (or turn center knob) to highlight the Engine Oil option and press ENTER to select the option
  4. Use the UP/DOWN arrows (or turn center knob) again to highlight the Reset Distance option and press ENTER to select the option
  5. The mileage should change to 0
  6. Press the BACK button on the control panel to go back to the previous screen
  7. Repeat steps 3-6 for Oil Filter and Tire (if the tires were rotated during service)

 
Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

simple-1   simple-1