How To Reset Oil Life Without BMW 20Pin Connector Scan Tool

0
1194
BMW 20Pin Connector

How To Reset Oil Life Without BMW 20Pin Connector Scan Tool

  1. Turn the key to the OFF position
  2. Find round diagnostic port under the hood of the vehicle and remove the cap
  3. Use a jumper wire (paper clip works really well too) to jump port numbers 7 and 19 (see diagram above)
  4. Turn the vehicle to the ON position without turning the engine on
  5. Wait 10 seconds and then remove the jumper wire with the key still in the ON position
  6. The service indicator should return to full green bars and the warning should go away

Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

simple-1   simple-1

* The information contained in this app/page is for general guidance and we are not responsible for any errors or injuries that may occur.

SHARE

NO COMMENTS

LEAVE A REPLY